manualshive.com logo in svg

NEC Express5800/A1080a, User Manual, Page: 138 / 696

Share
Download
NEC Express5800/A1080a User Manual Download Page 138

Hardware 

 

 

 

138

 

Mounting/Unmounting the server to/from Rack 

 

Mount the server to a rack (the unmounting procedure is also described). 
If you purchased internal optional products sold separately, mount it before mounting the server 
to a rack. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 

CAUTION

 

 

Observe the following instructions to use the server safely. There are risks 
of fire, personal injury, or property damage. Refer to descriptions after 
page iii for details. 

●

 Ensure to use a lifter to lift the server and support the bottom of   

the server firmly to install or relocate it. If there is no lifter,   
carrying the server by less than 4 persons may cause backache.   

●

 Do not install the server in other than the location specified. 

●

 Do not get your fingers caught.   

●

 Do not unmount the server when the rack is unstable. 

Pull out the stabilizer installed at the front bottom of the rack. 

●

 Do not mount the server while leaving the cover removed.

 

Summary of Contents for Express5800/A1080a

























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments