![background image](http://html.mh-extra.com/html/nec/express5800-a1080a/express5800-a1080a_user-manual_251254144.webp)
Hardware
144
3. Place the slide rail assembly on the front side of the rack onto the position specified in step 1.
Hitch the holding tab to the square hole.
IMPORTANT:
When mounting the slide rail, the
middle rail may fall out if the
slide rail inclines.
NOTE:
●
Check the installation direction
of the slide rail assembly.
Ensure that the bracket side
(side without rail) is placed
outside the rack when hooking
to a square hole of the rack.
●
There are square holes for
screwing on pillars on the front
and rear side of rack. There is a
circular punch mark per 1U
unit on a rack manufactured by
NEC. Use them at installation
as a guide.
Middle Rail
Front Side
Holding Tab
Square Hole
Punch Mark Per 1U
Middle Rail
Summary of Contents for Express5800/A1080a
