![background image](http://html.mh-extra.com/html/nec/express5800-a1080a/express5800-a1080a_user-manual_251254523.webp)
Hardware
523
-> dump –destination tftp://192.168.1.1/sg.bin partition1
・
exit
The format of exit command is shown below.
exit
・
help
The format of help command is shown below.
help [<help topics>]
Below are the examples.
-> help
COMMAND COMPLETED :
help
Command Name: Help
SMASH CLP is a command line interface for the remote user to the server. The
commands are of the form of <verb><options><targets><target-properties>.
Commands List:
cd
Dump
Exit
Help
Load
Reset
Set
Show
HINT:
•Before executing this command, the TFTP server should be
configured. Because “UDP/69 is used for the TFTP
protocol,the security setting might be required depending on
the user’s environment.
By pressing CTRL + C, it is possible to interrupt the command
during TFTP network communication.
•SG,System Genaration, means the configuration settings for
the system.
Summary of Contents for Express5800/A1080a
