manualshive.com logo in svg

NEC Express5800/A1080a, User Manual, Page: 614 / 696

Share
Download
NEC Express5800/A1080a User Manual Download Page 614

Operation and Maintenance 

 

614

 

Repairing System 

 
 

Windows Server 2008 

 

If the system cannot be started for some reason, use Recovery Console to restore the system. 
Note that this method is recommended to conduct under the supervision with users or 
administrators with a deep knowledge of the system. Refer to the online help for more details. 

 
 

Windows Server 2008 R2 

 

If the system cannot be started for some reason, use Recovery Console to restore the system. 
Note that this method is recommended to conduct under the supervision with users or 
administrators with a deep knowledge of the system. Refer to the online help for more details.

 

 

Summary of Contents for Express5800/A1080a

























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments