manualshive.com logo in svg

NEC Express5800/A1080a, User Manual, Page: 159 / 696

Share
Download
NEC Express5800/A1080a User Manual Download Page 159

Hardware 

 

 

 

159

 

26.  Attach the cable cover to the rack by using 2 screws. 
 

 

 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

27.Attach repeat ties to the cable arm. 

There are 25 repeat ties provided. 
Of them, 20 repeat ties are attached to 20 holes of the cable arm and used to fix the cable. 
One of them is used to fix the cable arm to the cable cover so that the cable arm is in stable 
condition.  

 
 
 
 
 
 
 
 

NOTE: 
Loosen the 4 screws on the front of the server that were tightened 
in step 12 and move the server back and forth to check that the 
server can be pulled out from or inserted into the rack smoothly. 
Fix the rack again after checking it. 

Rack  nuts  for 
square  or  circle 
holes 

The place for brackets(rack nuts). 
This example is for square holes.

Summary of Contents for Express5800/A1080a

























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments