NEC Express5800/A1080a, User Manual, Page: 416 / 696

Hardware
416
Display or set Valid (Enable/Disable)/Invalid by Core unit.
(4) Selecting the server enables to display or set in
“Server.”
 MAX Valid Core Count : The maximum number of cores which can be in valid status in the
applicable server
(5)
Display Valid (Enable/Disable)/Invalid of each core in the applicable server.
Core status can be changed by operating radio button.
(4)
(5)
(6)
(7)
IMPORTANT:
 You need set Valid(Enable/Disable) status so that the total count
of “Valid Core Count” does not exceed “Max Valid Core Count” .
 Core number of each core is not same by processor.
 If the PMM will be added or replaced, you can confirm the core
number assigned to that PMM. At this time, core number is
displayed as ascending-order.
The core number will be assigned after DC power is turned on.