NEC Express5800/A1080a, User Manual, Page: 410 / 696

Hardware
410
1.4.6 Mode Settings
Mode Settings is displayed by selecting
“Settings” and clicking “Mode Settings” of the menu
on the left side of the screen.
Various operations for the system can be set in
Mode Settings.
(1) Clicking “Submit” enables to set the information for (3) and (4).
(2) Clicking
“Default Select” enables to restore the operation mode status to default status.
(3) Power
Display/set power related setting information.
These settings will be applied after the server reset.
Power Redundancy : Power redundancy
2N
：
2N configuration
(Power Units are Fully Redundant)
N+1
：
N+1
configuration
(Power Units are Redundant)
N
：
N+1
configuration (
Power Units are Non-Redundant
)
* Default value is ‘N+1’.
Policy when Power Redundancy Lost : Process to be taken at power redundancy loss
Performance
：
Performance Mode
Keep ： Marinating Performance
* Default value is ‘Performance’.
Processor Power Control
: Processing device power consumption control
Passive
：
Not change usable the processor state(P-State)
(1)
(2)
(3)
(4)