![background image](http://html.mh-extra.com/html/nec/express5800-a1080a/express5800-a1080a_user-manual_251254487.webp)
Hardware
487
2.10.1 Enable/Disable Component
Enable/Disable Component is displayed by selecting
“Fault Information”
and clicking
“Enable/Disable”
of the menu on the left side of the screen.
Hardware unit status (Enable/Disable) can be checked and Enable/Disable setting can be
performed manually in
Enable/Disable Component
.
(1)
Display/set Enable/Disable status.
Displayed contents are as follows.
Setting
: Enable/Disable status
Name
: Disable sensor name
(2) Clicking
“Submit”
enables to set the information of (1).
(3) Clicking
“Cancel”
enables to move to
Fault Information
screen.
IMPORTANT:
• When non-redundant hardware unit is set to Disable, server
cannot be booted.
• When hardware unit which was previously “Disabled” is set to
“Enable” at the time of failure occurrence, the phenomenon may
reoccur to the unit although it may temporarily recover.
(1)
(2)
(3)
Summary of Contents for Express5800/A1080a
