manualshive.com logo in svg

NEC Express5800/A1080a, User Manual, Page: 412 / 696

Share
Download
NEC Express5800/A1080a User Manual Download Page 412

Hardware 

 

 

 

412

 

 

 

 

■Power Capping Technology 

 
The 

Power Capping technology can provide the feature enabling to configure the upper limit regarding 

the power consumption of the server. When this feature is enabled, the operating system will 
automatically control the CPU performance and the power consumption of the server can not exceed 
the upper limit. By using this feature, a user can operate the server for the purpose of reducing the 
power consumption of the server. 

This 

Power Capping technology differs from the general Power Capping technology in that the 

general Power Capping technology is designed the average of the power consumption does not 
exceed the upper limit, however this Power Capping technology is designed the moment of the power 
consumption can not exceed the upper limit.   
So, the power consumption of the general Power Capping technology will exceed the upper limit, 
however the power consumption of this Power Capping technology can not exceed the upper limit. 
Instead when this Power Capping technology is enabled, the server’s CPU will be controlled in the 
power consumption falls below the upper limit. So, the CPU performance will be down.

 

 

 

IMPORTANT : 

The Power Capping technology can be supported in the Mode 
Settings by using the management firmware 3.x.x.x later. 

(5)

Summary of Contents for Express5800/A1080a

























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments