NEC Express5800/A1080a, User Manual, Page: 458 / 696

Hardware
458
Failing Unit Removal: Automatically disenabling functionality for failure hardware
components
Disable failing units
Enable failing units
* Default value is “Disable failing units”.
Partition boot retry count
A user can designate server boot retry times. (Settable value: 0-9)
* Default value is “5” times.
(10) Power
Display/set setting information related to power.
Power Restore Policy
DC stays off when AC is applied
: Maintain DC powered-off after AC power supplied.
Restore DC to previous state prior to AC loss
: Restore DC-power to the previous DC Power status before AC lost.
Always DC on when AC is applied
： DC power will be always powered on after AC power supplied.
* Default value is “DC stays off when AC is applied”.
Power On Delay Time
A user can designate the delay time for DC power will be supplied after AC
powered on by second unit. (Settable value: 20-255)
* Default value is “20” seconds.
Power Cycle Interval
A user can designate the power cycle interval time by second unit. (Settable value:
0-255)
* Default value is “0” second.
CPU Throttle Mode
A user can designate P-state value for the power saving mode. (Settable value:
0-7)
* Default value is “0” second.
CPU Throttle Mode Current
Current P-state is displayed.