![background image](http://html.mh-extra.com/html/nec/express5800-a1080a/express5800-a1080a_user-manual_251254428.webp)
Hardware
428
1.8.1 Enable/Disable
Component
Enable/Disable Component is displayed by selecting
“Fault Information”
and clicking
“Enable/Disable”
of the menu on the left side of the screen.
Hardware unit status (Enable/Disable) can be checked and hardware unit can be set manually in
Enable/Disable Component.
(1)
Display/set Enable/Disable status.
Contents to be displayed are as follows.
Setting
: Enable/Disable status
Name
: Disable sensor name
(2) Clicking
“Submit”
enables to set the information of (1).
(3) Clicking
“Cancel”
enables to move to
Fault Information
screen.
IMPORTANT:
• When non-redundant hardware unit is set to Disable, server
cannot be booted.
• When hardware unit which was previously disabled is set to
Enable, the phenomenon may reoccur to the unit although it may
temporarily recover.
(1)
(2)
(3)
Summary of Contents for Express5800/A1080a
