NEC Express5800/A1080a, User Manual, Page: 569 / 696

Operation and Maintenance
569
Cleaning
Clean the server on a regular basis to keep the serer in a good shape.
Cleaning the Server
Wipe the external surfaces of the server in the following procedure:
1. Make sure that the server is powered off (the POWER LED is unlit).
2. Unplug the power cord of the server from a power outlet.
3. Wipe off the dust from the power cord plug with a dry cloth.
4.
Soak a soft cloth in a neutral detergent that is diluted with cold or lukewarm water, and
squeeze it firmly.
5. Rub off stains on the server with the cloth prepared in Step 4.
6. Soak a soft cloth in water, squeeze it firmly, and wipe the server with it once again.
7. Wipe the server with a dry cloth.
8.
Wipe off dust from the fan exhaust opening on the rear of the server with a dry cloth.
IMPORTANT:
● To avoid altering the material and color of the server, do not use
volatile solvents such as thinner and benzene to clean the server.
● The power receptacle, the cables, installed devices, and/or inside
of the server must be kept dry. Do not moisten them with water.
Observe the following instructions to use the server safely. Failure to
follow these instructions may result in death or serious personal injuries.
Refer to pages to after for details.
●
Do not disassemble, repair, or alter the server.
● Do not look into the Optical Disc Drive.
●
Disconnect the power plug before cleaning the server.
WARNING