Murphy EMS-GC10, Operator'S Manual

Page: 16 / 183

Section 75 00-02-0878
2013-03-07 - 10 -
Display View Description and Notes
Edit value with the UP and DOWN buttons and
save the value by pressing the ENTER button
NOTE: The available parameters depend on the set options. Some
parameters can only be changed using the PC utility software
(USW) for EMS-GC10.
Status Line Text
Below is a list of standard conditions with comments.
Condition Comment Note
Block Block mode is activated
Simple Test
Test mode is activated
Full Test
Simple Test ###.#Min Test mode activated and test timer
counting down
Full Test ###.#Min
Island Man
Genset stopped or running and no
other action taking place
Island Semi
Ready Island Auto Genset stopped in Auto
Island Active Genset running in Auto
AMF Man
Genset stopped or running and no
other action taking place (AMF mode)
AMF Semi
Ready AMF Auto Genset stopped in Auto (AMF mode)
AMF Active Genset running in Auto (AMF mode)
Load Takeover Man Genset stopped or running and no
other action taking place (LTO mode)
Load Takeover Semi
Ready LTO Auto Genset stopped in Auto (LTO mode)
LTO Active Genset running in Auto (LTO mode)
DG Blocked For
Start Generator stopped and active
alarm(s) on the generator
GB On Blocked
Generator running, GB open and an
active "Trip GB"
alarm
Shutdown Override The configurable input is active
Access Lock
The configurable input is activated,
and the operator tries to activate one
of the blocked keys