MPE XR III series, Operator'S Manual

Page: 9 / 129

3.9 Series Operation 43
3.9.1 Series Operation - Direct 44
3.9.2 Series Operation - Master/Slave 44
3.10 Pulse Loading 45
3.11 Nomenclature 45
4.0 PROGRAMMING WITH SCPI COMMANDS 48
4.1 Command Features 48
4.2 Electrical Testing Using RS232 Communications 48
4.3 SCPI Subsystem Commands 49
4.3.1 Source Subsystem 49
4.3.1.1 VOLT and VOLT:TRIG 50
4.3.1.2 VOLT:PROT 51
4.3.1.3 CURR and CURR:TRIG 51
4.3.1.4 CURR:PROT 52
4.3.1.5 PER (not available for XR Series power supplies) 53
4.3.2 Measure Subsystem 53
4.3.2.1 MEAS:VOLT? 53
4.3.2.2 MEAS:CURR? 54
4.3.3 System Subsystem 54
4.3.3.1 SYST:VERS? 54
4.3.3.2 SYST:ERR? 54
4.3.4 Status Subsystem 55
4.3.4.1 Operation Register 55
4.3.4.2 Questionable Register 56
4.3.5 Output Subsystem 56
4.3.5.1 OUTP? 56
4.3.5.2 OUTP:ARM (not available for XR Series power supplies) 57
4.3.5.3 OUTP:START 57
4.3.5.4 OUTP:STOP 58
4.3.5.5 OUTP:PROT:CLE 58
4.3.6 Abort Subsystem 58
4.3.7 Trigger Subsystem 59
4.3.8 Initiate Subsystem 59
4.3.9 Calibrate Subsystem 60
4.3.9.1 CAL:IDN 60
4.3.9.2 CAL:PASS 60
4.3.9.3 CAL:POT 61
4.3.9.4 CAL:SCAL:VOLT 61
4.3.9.5 CAL:SCAL:CURR 61
4.3.9.6 CAL:SCAL:INP 62
4.3.9.7 CAL:DEF 62
4.3.9.8 CAL:STOP 62
4.3.10 Configure Subsystem 63
v