MPE XR III series, Operator'S Manual

Page: 44 / 129

Figure 3.11 Calibration
Pn SETTING ENTERED
Pn SETTING RETURNS TO
ENTER 10 DISPLAY VO IN VOLT DISPLAY
DISPLAY P1 SETTING IN CUR DISPLAY
DEFAULT
ITEM
NOTES:
Pn SETTING INCREMENTS
ENTER
CLEAR
OUTPUT POWER DISABLED
POWER LED OFF
STANDBY LED ON
OUTPUT POWER ENABLED
STANDBY LED OFF
POWER LED ON
STOP
START
1. Pn SETTINGS CAN BE 0-255
PS RETURNS TO NORMAL OPERATION CLEAR
DISPLAY dEF IN VOLT DISPLAY PS RETURNS TO NORMAL OPERATION
SETS POTENTIOMETERS TO FACTORYDEFAULT ENTER
DISPLAY 1 I N MEMORY DISPLAY
2. ALL Pn SETTINGS ARE PRECEEDED WITH P AND ALTERNATE
DISPLAY 2 I N MEMORY DISPLAY
DISPLAY P2 SETTING IN CUR DISPLAY
DISPLAY VO IN VOLT DISPLAY
DISPLAY IO IN CUR DISPLAY
DISPLAY P3 SETTING IN VOLT DISPLAY
DISPLAY 3 I N MEMORY DISPLAY
DISPLAY P4 SETTING IN VOLT DISPLAY
DISPLAY 4 I N MEMORY DISPLAY
DISPLAY IO IN CUR DISPLAY
DISPLAY 5 I N MEMORY DISPLAY
DISPLAY P5 SETTING IN CUR DISPLAY
DISPLAY VO IN VOLT DISPLAY
Pn SETTING DECREMENTS
DISPLAY FIRMWARE REVISION SETTING IN VOLT DISPLAY
3. ALL REVISION SETTINGS ARE PRECEEDED WITH r (EXAMPLE r1.00).
DISPLAY rEt IN VOLT DISPLAY PS RETUNS TO NORMAL OPERATION ENTER
4. RETURNS TO NORMAL AFTER 60 SECONDS OF INACTIVITY.
PREVIOUS SETTING
MENU
START
STOP
TRIP SET
CLEAR
V/I SET
5. ENTER 10: ENTER PRESSED FOR 10 SECONDS.
TRIP SET
V/I SET
WITH POTENTIOMETER NUMBER. FOR EXAMPLE, POTENTIOMETER 3
SET TO 187 WILL DISPLAY P187/3187.
DISPLAY HARDWARE REVISION SETTING IN CUR DISPLAY
conF FLASHES IN VOLT DISPLAY
(STANDBY MODE ONLY)
CAL FLASHES IN VOLT DISPLAY
OCT DISPLAYED IN CUR DISPLAY
OVT DISPLAYED IN VOLT DISPLAY
OCT LED FLASHES
OVT LED FLASHES
ITEM
32