MPE XR III series, Operator'S Manual

Page: 62 / 129

Figure 4.1 RS232 Communications using Microsoft Windows (tm) HyperTerminal
4.3.1.1 VOLT and VOLT:TRIG
These commands set the immediate voltage level or the pending triggered voltage level of the
power supply. The immediate level is the voltage programmed for the power supply output. The
pending triggered level is a stored voltage value that is transferred to the power supply when a
trigger occurs. A pending triggered level is unaffected by subsequent VOLT commands and
remains in effect until the trigger subsystem receives a trigger or is aborted with an ABORt
command. In order for VOLT:TRIG to be executed, the trigger subsystem must be initiated (see
Initiate Subsystem).
VOLT? and VOLT:TRIG? return presently programmed immediate and triggered levels. If no
triggered level is programmed, then the VOLT level is returned for both values. VOLT? MAX
and VOLT? MIN return the maximum and minimum programmable immediate voltage levels.
VOLT:TRIG? MAX and VOLT:TRIG? MIN return the maximum and minimum programmable
triggered voltage levels.
Command Syntax: [SOURce]:VOLTage[:LEVel][:IMMediate][:AMPLitude] <NRf+>
[SOURce]:VOLTage[:LEVel]:TRIGgered[:AMPLitude] <NRf+>
50