Mitsubishi Electric NZ2GF2B-60TCRT4, User Manual

Page: 60 / 388

58
(d) Module control data area (address: 1000H to 14FFH)
*1 The default value depends on the mode used. For details on the default value, refer to the following.

Page 309, Appendix 3
*2 This column indicates whether data can be read from or written to the remote buffer memory area through sequence
programs.
R: Reading enabled
W: Writing enabled
*3 This column indicates whether the setting in the remote buffer memory area is automatically changed when the input
range is changed. For details, refer to the following.

Page 135, Section 8.1.6
*4 This column indicates whether data can be written to the non-volatile memory by turning off and on Set value backup
instruction (RY15). For details, refer to the following.
 Page 136, Section 8.1.7
*5 This column indicates whether or not the setting can be changed by turning off and on During operation setting change
instruction (RY10). For details, refer to the following.

Page 295, Appendix 1.2 (3)
*6 This column indicates whether or not the setting can be changed by turning off and on Initial data setting request flag
(RY9) when all channels stop. For details, refer to the following.
 Page 295, Appendix 1.2 (1)
Address
(decimal
(hexadecimal))
Target
channel
Setting contents
Default
value
*1
Read/Write
*2
Automatic
setting
*3
Non-volatile
memory
write
availability
*4
Change of
setting
during
operation
*5
Change
of setting
when all
channels
stop
*6
Reference
Temperature input mode
4096 (1000H) Station Error history clear command 0 R/W    
Page 364,
Appendix 3
(70)
4097 (1001H) Station
Error history clear
completed
0 R    
Page 364,
Appendix 3
(71)
4098 to
5375(1002H to
14FFH)

System area
      