Mitsubishi Electric NZ2GF2B-60TCRT4, User Manual

Page: 363 / 388

361
APPENDICES
A
Appendix
3 Det
a
ils of
Rem
o
te
Buf
fer Me
mory
A
reas
(66)Function extension bit monitor (address: 603H)
The following settings set with Sampling cycle and function extension setting (address: 1H) are stored.
• Auto-setting at input range change (address: 1H. b0)
• Setting change rate limiter setting (address: 1H. b1)
• Control output cycle unit selection setting (address: 1H. b2)
• Moving averaging process setting (address: 1H. b3)
For details on Sampling cycle and function extension setting (address: 1H), refer to the following.

Page 309, Appendix 3 (1)
The following figure and table show how the setting is stored.
(67)Sampling cycle monitor (address: 604H)
Current sampling cycle is stored.
• 0: 500ms/4 channels
• 1: 250ms/4 channels
Set the sampling cycle on Sampling cycle selection (address: 1H. b12).
For details, refer to the following.
 Page 309, Appendix 3 (1)
Bit
Flag name (Function extension
bit monitor)
Description
b0 Auto-setting at input range change
When the input range is changed, the related remote buffer memory data is automatically changed to
prevent the values in those remote buffer memory areas from being out of the setting range.
(

Page 316, Appendix 3 (5) (d))
0: Disable
1: Enable
b1 Setting change rate limiter setting
Select whether the setting change rate limiter to be set in a batch or individually. (  Page 167,
Section 8.3.10)
0: Temperature Rise/Temperature Drop Batch Setting
1: Temperature Rise/Temperature Drop Individual Setting
b2
Control output cycle unit selection
setting
Select 0.1s or 1s as a unit for the cycle of turning on/off the transistor output. (

Page 158, Section
8.3.6)
0: 1s Cycle
1: 0.1s Cycle
b3 Moving averaging process setting
Select whether the moving averaging process setting is used. (

Page 129, Section 8.1.3)
0: Enable
1: Disable
b4 to b15

(fixed to 0)

(unused)
Common
b15
0 0 0 0 0 0 0 0 0 0 0 0
b2 b3 b4 b1 b0 to
Bit data from b4 to b15 are fixed to 0.
Common