Mitsubishi Electric NZ2GF2B-60TCRT4, User Manual

Page: 119 / 388

117
CHAPTER 7 VARIOUS SETTINGS
7
7.
1 Par
a
met
e
r
S
e
ttings
*1 For the NZ2GF2B-60TCTT4, "Setting Range" is already set to -2000 to 32000, which is the lower limit value of the
setting range for Input range (Input range: 7, 10, 20, 29, 41) and the upper limit value (Input range: 205) (For the
NZ2GF2B-60TCRT4, the lower limit value is -3000). When actually set the values, enter the values within the setting
range for Input range.
*2 "Setting Range" is already set to -32000 to 32000, which is the lower limit value of the setting range (Input range: 205)
and the upper limit value (Input range: 205). When actually set the values, enter the values within the setting range of
the set alert mode.
*3 "Setting Range" is already set to -32000 to 32000, which is the full scale lower limit value for Input range (Input range:
205) and the full scale upper limit value (Input range: 205). When actually set the values, enter the values within the full
scale range for Input range.
*4 "Setting Range" is already set to 0 to 32000. 32000 is the full scale upper limit value for Input range (Input range: 205).
When actually set the values, enter the values within the full scale range for Input range.
CH  Setting change rate limiter_temperature drop Page 324, Appendix 3 (12)
Warning error control
Warning non-inductive belt setting Page 339, Appendix 3 (31)
Warning delay count Page 340, Appendix 3 (32)
Temperature rise completion setting
Temperature rise completion range setting Page 340, Appendix 3 (33)
Temperature rise completion soak time setting Page 341, Appendix 3 (34)
Sensor correction function selection CH  Sensor correction function selection Page 341, Appendix 3 (35)
Cooling system setting CH  Cooling system setting Page 343, Appendix 3 (37)
AT loop disconnection detection function CH  AT loop disconnection detection function enable_disable setting Page 343, Appendix 3 (38)
Manipulated value resolution switching for output with another analog module Page 344, Appendix 3 (39)
Cold junction temperature compensation selection Page 344, Appendix 3 (40)
Transistor output monitor ON delay time setting Page 345, Appendix 3 (41)
CH  Scaling function
CH  Measured value_PV_scaling function_enable_disable setting Page 345, Appendix 3 (42)
CH  Measured value_PV_scaling lower limit value
Page 346, Appendix 3 (43)
CH  Measured value_PV_scaling upper limit value
CH  Warning setting
CH  Mode setting of warning 1
Page 346, Appendix 3 (44)
CH

Mode setting of warning 2
CH  Mode setting of warning 3
CH  Mode setting of warning 4
CH  Warning setting value 1
*2
Page 348, Appendix 3 (45)
CH  Warning setting value 2
*2
CH  Warning setting value 3
*2
CH  Warning setting value 4
*2
Sensor correction value setting CH

Sensor correction value setting Page 352, Appendix 3 (51)
CH  Auto tuning setting
CH  Auto tuning mode selection Page 354, Appendix 3 (56)
CH  AT bias
*3
Page 355, Appendix 3 (57)
Self tuning setting CH  Self tuning setting Page 356, Appendix 3 (58)
CH

Simultaneous temperature rise
function setting
CH  Simultaneous temperature rise group setting Page 357, Appendix 3 (59)
CH  Simultaneous temperature rise lean data
*4
Page 357, Appendix 3 (60)
CH  Simultaneous temperature rise waste time Page 358, Appendix 3 (61)
CH  Simultaneous temperature rise AT mode selection Page 359, Appendix 3 (62)
Setting item Reference