Mitsubishi Electric MR-JE-_A, Instruction Manual

Page: 360 / 370

APPENDIX
App. - 21
App. 8 Status of general-purpose AC servo products for compliance with the China RoHS
directive
(1) Summary
The China RoHS directive:
电子信息产品污染控制管理办法
(Management Methods for Controlling
Pollution by Electronic Information Products) came into effect on March 1, 2007. The China RoHS
directive was replaced by the following China RoHS directive:
电器电子产品有害物质限制使用管理办法
(Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and
Electronic Products). The succeeding China RoHS directive has been in effect since July 1, 2016.
The China RoHS directive restricts the use of six hazardous substances (lead, mercury, cadmium,
hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl ethers (PBDE))
and other hazardous substances specified by the State (currently no applicable substances). The EU
RoHS directive (2011/65/EU) also restricts the use of the above six hazardous substances.
(2) Status of our products for compliance with the China RoHS directive
The following tables show the content of six hazardous substances in our products and Environment-
Friendly Use Period marks. Table app. 1 is created based on the standard SJ/T11364.
Table app. 1 Names and the content of hazardous substances in the products
Substance name
Threshold standard
Part name
Hazardous substance (Note 1)
Environment-
Friendly Use
Period mark
(Note 2)
Remark
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr(VI))
PBB PBDE
Threshold of cadmium: 0.01 wt% (100 ppm),
Threshold of substances other than cadmium: 0.1 wt% (1000 ppm)
Servo amplifier
Servo system
controller Mounting board
Heat sink
Resin cabinet
Plate and screw
Servo motor Bracket
Mounting board
Resin cabinet
Core and cable
Cable product Cable
Including
connector set
Connector
Optional unit Mounting board
Resin cabinet
Plate and screw
Note 1. : Indicates that said hazardous substance contained in all of the homogeneous materials for this part is below the limit
requirement of GB/T26572.
: Indicates that said hazardous substance contained in at least one of the homogeneous materials for this part is above the
limit requirement of GB/T26572.
2. Indications based on "Marking for the restriction of the use of hazardous substances in electrical and electronic product"
[SJ/T11364-2014]
Indicates that a certain hazardous substance is contained in the product manufactured or sold in China.
Observe safety and usage precautions for the product, and use it within a limited number of years from the
production date. Thereby, any of the hazardous substances in the product does not cause environmental
pollution, or seriously affect human health or property.
Indicates that no certain hazardous substance is contained in the product.