Mitsubishi Electric MR-JE-_A, Instruction Manual, Page: 170 / 370

5. PARAMETERS
5 - 31
No./symbol/
name
Setting
digit
Function
Initial
value
[unit]
Control mode
P S T
PC05
SC1
Internal
speed
command
1/internal
speed limit 1
Set speed 1 of internal speed commands.
Setting range: 0 to permissible instantaneous speed
100
[r/min]
Set speed 1 of internal speed limits.
Setting range: 0 to permissible instantaneous speed
PC06
SC2
Internal
speed
command 2
Internal
speed limit 2
Set speed 2 of internal speed commands.
Setting range: 0 to permissible instantaneous speed
500
[r/min]
Set speed 2 of internal speed limits.
Setting range: 0 to permissible instantaneous speed
PC07
SC3
Internal
speed
command 3
Internal
speed limit 3
Set speed 3 of internal speed commands.
Setting range: 0 to permissible instantaneous speed
1000
[r/min]
Set speed 3 of internal speed limits.
Setting range: 0 to permissible instantaneous speed
PC08
SC4
Internal
speed
command 4
Internal
speed limit 4
Set speed 4 of internal speed commands.
Setting range: 0 to permissible instantaneous speed
200
[r/min]
Set speed 4 of internal speed limits.
Setting range: 0 to permissible instantaneous speed
PC09
SC5
Internal
speed
command 5
Internal
speed limit 5
Set speed 5 of internal speed commands.
Setting range: 0 to permissible instantaneous speed
300
[r/min]
Set speed 5 of internal speed limits.
Setting range: 0 to permissible instantaneous speed
PC10
SC6
Internal
speed
command 6
Internal
speed limit 6
Set speed 6 of internal speed commands.
Setting range: 0 to permissible instantaneous speed
500
[r/min]
Set speed 6 of internal speed limits.
Setting range: 0 to permissible instantaneous speed
PC11
SC7
Internal
speed
command 7
Internal
speed limit 7
Set speed 7 of internal speed commands.
Setting range: 0 to permissible instantaneous speed
800
[r/min]
Set speed 7 of internal speed limits.
Setting range: 0 to permissible instantaneous speed
PC12
VCM
Analog speed
command -
Maximum
speed
Analog speed
limit -
Maximum
speed
Set the speed at the maximum input voltage (10 V) of VC (Analog speed command).
When "0" is set, the analog speed command maximum speed would be the rated
speed of the servo motor connected.
If a value equal to or larger than the permissible speed is inputted to VC, the value is
clamped at the permissible speed.
Setting range: 0 to 50000
0
[r/min]
Set the speed at the maximum input voltage (10 V) of VLA (Analog speed limit).
When "0" is set, the analog speed command maximum speed would be the rated
speed of the servo motor connected.
If a limited value equal to or larger than the permissible speed is inputted to VLA, the
value is clamped at the permissible speed.
Setting range: 0 to 50000