Using Overseas
151
(Smartphone flat-rate) before returning to
Japan (P.155). If you do not switch the
access point in Japan, you may incur high
communication charges.
■About screen display
•
The type of network you are using is
indicated in the status bar on the screen.
•
The network operator you are connecting is
shown on Notifications panel.
■Clock settings
If the "Automatic" checkbox in "Date & time"
has been marked, the time and time zone of
the FOMA terminal's clock will be
automatically changed when information
about the local time and time zone is received
from the network of the overseas operator to
which you are connected.
•
Time adjustment may not work properly
depending on the network of the overseas
operator. Set the time zone manually in
such a case.
•
The timing of these changes varies
depending on the overseas operator.
•
If you stay in a country that uses daylight-
saving time, check the difference between
the local time and the time displayed on
standby screen. Automatic clock setting
may not be available depending on the
network operators.
•
Clock setting→ P.83
■Inquiries
•
If your FOMA terminal or UIM is lost or
stolen overseas, contact DOCOMO
immediately from your current location and
carry out the procedure to suspend usage.
For contact information, see the last page
of this manual. Please note that you are
liable for any call or communication charges
incurred after the loss or theft of the FOMA
terminal.
•
You will need the country's international call
access code or universal number
international prefix if calling from a land-line
phone from overseas.
After returning to Japan
When you return to Japan, the FOMA terminal
automatically connects to the FOMA network.
If it is unable to connect, change the
following settings.
•
Set "Preferred network mode" to "WCDMA／
GSM auto" in "Network Mode" menu.
→P.154
•
In the settings of "Network operators", set
"Available networks" to "Select
automatically".→ P.155
Icon
Meaning
／
Connected to/using GPRS
／
Connected to/using 3G
(packet)
