manualshive.com logo in svg

Maeda MC815C, Operation Manual, Page: 60 / 426

Share
Download
Maeda MC815C Operation Manual Download Page 60

50 

4.4  PRECAUTIONS FOR TERMINATING CRANE OPERATION 

(REMOTE CONTROL SYSTEM) 

PRECAUTIONS FOR TERMINATING THE OPERATION BY THE TRANSMITTER 

• Before stowing the outriggers, ensure that the boom and fly jib are stowed in the correct 

positions. 

• Before stowing the outriggers, set the operation mode to the “OUTRIGGER MODE” and 

check that the mode is switched correctly. 

• When all the operation of the Transmitter is complete, always turn “OFF” the power of the 

Transmitter. 

• Under no condition will the Transmitter be ON unless the Crane is in operation. Be sure to 

keep the power turned “OFF”. Otherwise, unexpected touching or contact of operation levers 
or buttons of the Transmitter with any other object may cause undesired motion of the Crane 
and a serious accident such as tipping or collision may occur. 

Summary of Contents for MC815C











































































































































































































































































































































































































































Reviews:

No comments