manualshive.com logo in svg

Maeda MC815C, Operation Manual, Page: 326 / 426

Share
Download
Maeda MC815C Operation Manual Download Page 326

316 

[6] REPLACEMENT HYDRAULIC OIL TANK AIR FILTER 

•  Various parts are at elevated temperatures immediately after engine operation. Do not 

replace the filter immediately. Wait until the oil is cooled. 

•  The oil may spout out when the air filter of the hydraulic oil tank is removed. 
  Remove the air filter to relieve internal pressure by slowly rotating it first. 
•  Securely close the air filter after refilling. 
  If the air filter falls during the operation, hot oil may spout out of the pan, causing 

burns. 

 

1.  Place the machine on a level surface. 

 

2.  Remove 2 pieces of mounting bolts (2), and remove the 

inspection cover (1). 

 

 

 

 

 

3.  Remove the air filter (F) and replace with new one. 

NOTES 

The air filter (F) is cap-integrated type, so replace with the 
cap. 

 

4.  Mount the inspection cover (1) with the mounting bolts 

(2).

Summary of Contents for MC815C











































































































































































































































































































































































































































Reviews:

No comments