manualshive.com logo in svg

Maeda MC815C, Operation Manual, Page: 264 / 426

Share
Download
Maeda MC815C Operation Manual Download Page 264

254 

6. LUBRICATING OIL

 

6.1 USE OF LUBRICATING OIL ACCORDING TO TEMPERATURES 

Use of lubricating oil should vary with changes in temperature. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• A specified oil quantity is defined as a total quantity of oil including that for unit piping, and a 

replacement oil quantity is defined as a quantity of oil to be replaced at inspection and 

maintenance. 

• Always use SAE10W-CD, SAE10W-30CD, or SAE10W-40CD to start the engine with 

temperature at 0°C or below despite rise in diurnal temperature. 

• Be sure to use our recommended abrasion-resistant hydraulic oil for the hydraulic oil system. 

  ISO VG32 is used when the product was shipped. 

• For adjustment of antifreeze concentrations in coolant with temperature at -10°C or below, see 

“INSPECTION AND MAINTENANCE 9.10 EVERY 1000 HOURS MAINTENANCE [1] 

CLEANING ENGINE COOLING SYSTEM”. 

 

 

Summary of Contents for MC815C











































































































































































































































































































































































































































Reviews:

No comments