manualshive.com logo in svg

Maeda MC815C, Operation Manual, Page: 14 / 426

Share
Download
Maeda MC815C Operation Manual Download Page 14

4 

3. MACHINE OVERVIEW 

3.1 SPECIFIED OPERATIONS 

This machine is to be used for the following operations: 

• Crane operation 

 

This machine is a mobile crane mounted on a crawler-type carrier and equipped with a 

boom-type crane. 

This self-propelled crane is capable of moving (travelling) in the worksite and lifting an object 

weighing up to the rated total load. 

This crane is also equipped with a remote control system. 

 

3.2 MACHINE STRUCTURE 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(1) Carrier  In this manual, the front, rear, right and left of the machine are determined as 

viewed from the driver’s seat in the traveling direction (forward) of the machine. 

(2) Crane 

The boom slewing directions (clockwise [right] and counterclockwise [left]) are 

determined as viewed from above the machine. 

Summary of Contents for MC815C











































































































































































































































































































































































































































Reviews:

No comments