Maeda MC815C, Operation Manual, Page: 267 / 426

257
8. INSPECTION AND MAINTENANCE LIST
Inspection and maintenance items
Page
9.1 PRE-OPERATION INSPECTION 260
9.1.1 INSPECTION BEFORE STARTING ENGINE (PATROL) 260
[1] INSPECTION AROUND CRANE 261
[2] INSPECTION OF WIRE ROPE 261
[3] INSPECTION OF HOOK BLOCK 261
[4] INSPECTION AROUND OUTRIGGER 261
[5] INSPECTION AROUND SAFE RUBBER TRACK 262
[6] INSPECTION AROUND CARRIER 262
[7] INSPECTION AROUND ENGINE 262
[8] INSPECTION AROUND CARRIER AND CRANE 262
9.1.2 INSPECTION BEFORE STARTING ENGINE 263
[1] CHECKING/REFILLING ENGINE COOLANT 263
[2] CHECKING OIL LEVEL AND REFILLING OIL IN ENGINE OIL PAN 264
[3] CHECKING FUEL LEVEL AND REFILLING IN FUEL TANK 265
[4] CHECKING/CLEANING FUEL PRE-FILTER 266
[5] CHECKING OIL LEVEL AND REFILLING OIL IN HYDRAULIC OIL TANK 267
[6] CHECKING OIL LEVEL AND REFILLING OIL IN SLEWING REDUCTION
GEAR CASE
268
[7] CHECKING/REFILLING OIL IN TRAVELLING MOTOR REDUCTION GEAR
CASE
269
[8] INSPECTING/CLEANING OF RADIATOR AND OIL COOLER FINS 270
[9] INSPECTING/REFILLING OF BATTERY ELECTROLYTE LEVEL 271
[10] CHECKING HORN FOR OPERATION 272
[11] CHECKING HEADLIGHTS FOR OPERATION 272
[12] INSPECTION OF FUSE 273
[13] INSPECTION OF OUTRIGGER DISPLAY 273
[14] ADJUSTING OPERATOR SEAT 274
9.1.3 INSPECTION BEFORE STARTING ENGINE (RADIO CONTROL) 275
[1] CHECKING PRIOR TO TURNING ON THE TRANSMITTER 275
[2] CHECKING AFTER TURNING ON THE TRANSMITTER 276
[3 ] CHECKING OF RECEIVER 277
9.1.4 INSPECTION AFTER STARTING ENGINE 278
[1] INSPECTION OF OUTRIGGER SAFETY EQUIPMENT OPERATION 278
[2] CHECKING OUTRIGGER OPERATION 281
[3] CHECKING CRANE OPERATIONS 282
[4] INSPECTION OF OVER HOIST DETECTOR 283
[5] INSPECTION OF MOMENT LIMITER 283
[6] INSPECTION OF OUTRIGGER EXTENSION POSITION 284
[7] CHECKING ENGINE EXHAUST GAS COLOUR, NOISE AND VIBRATION 284
9.1.5 INSPECTION OF ENGINE START AND STOP OPERATION (RADIO
CONTROL)
285
[1] INSPECTION OF ENGINE START OPERATION 285
[2] INSPECTION OF ENGINE STOP OPERATION 285
[3] INSPECTION OF OUTRIGGER MODE OPERATION 286