manualshive.com logo in svg

Maeda MC815C, Operation Manual, Page: 165 / 426

Share
Download
Maeda MC815C Operation Manual Download Page 165

155 

2.14.1 OUTRIGGER COMPONENTS 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(1) Positioning pin 
(2) Outrigger rotary 
(3) Outrigger ground contact cylinder 
(4) Outrigger extension cylinder 

(5) Outer box 
(6) Inner box 
(7) Outrigger adapter (plate) 

 
 

2.14.2 OUTRIGGER SETUP OPERATION 

 

[1] TASKS TO BE PERFORMED BEFORE STARTING THE ENGINE 

There are 4 outriggers installed on the machine. 
The following explains the setting procedure for only one 
“OUTRIGGER (4)”. Repeat the same procedure for the 
other three outriggers. 

 

 

 

1.  Shift the lock lever (1) into the lock (L) position. 
 
 
 
 

 
 
2.  Turn the starter switch to the “ON” position. 
 
 
 
 
 
 
 

Summary of Contents for MC815C











































































































































































































































































































































































































































Reviews:

No comments