Maeda MC815C, Operation Manual, Page: 416 / 426

406
CAUTION
To change to the searcher hook mode, manually switch after mounting the searcher hook to the
main boom tip.
[Description of monitor indication]
[4] Offset position display
The indication changes to six different patterns by manually
switching according to the actual angle set for the searcher
hook.
Expand the pull-down menu by touching the monitor screen to
select the appropriate positions.
[10] Mode selector switch (full automatic stowage)
The procedure for full automatic stowage is the same as the
standard specification except for winding up the hook.
When the winch settings are turned OFF in searcher hook
mode, the winch will not move during full automatic stowage. In
addition, hook stowage cannot be selected.
NOTES
The main boom cannot be lowered when Offset Position 60
or 80 degrees are selected.
[11] Setting switch (user mode)
The setting procedure for the user mode is the same as the
standard specification.
To change to the searcher hook mode, you need to switch
manually in the user mode.
For details on how to set the searcher hook mode, refer to
“5.1.2 Changing searcher hook mode”.
[12] Rated total load display
The rated total load of the searcher hook is shown when you
touch “RTL” on the monitor display.
Touch again to return to the original display.