
138
2.2 STARTING ENGINE
• Before starting the engine, make sure no personnel or impediments are close to the
machine and honk the horn.
2.2.1 NORMAL STARTING OF ENGINE
CAUTION
• If the ambient temperature is too low to start the engine, try again by following the
instructions described in “OPERATION 2.2.2 STARTING ENGINE IN COLD
ENVIRONMENT”.
• Do not keep the starter turned for more than 5 seconds. Doing so will accelerate the
battery discharge.
If the engine fail to start, wait for 1 minute before retrying.
• Verify that the fuel lever of the water separator pot is in the vertical position (open)
before starting the engine.
• Make sure that the remote control transmitter is in the “OFF” position.
1. Insert the key into the starter switch and turn the key to
the “START” position.
2. When the engine has started, release your hand from
the key.
The key automatically returns to the “ON” position.
Summary of Contents for MC815C
