Maeda MC815C, Operation Manual, Page: 272 / 426

262
• Check for slack wiring, loose connections or any trace of burning. Repair if any abnormality is
found.
• Pull out the position pin of each outrigger and rotate the outrigger rotary to see if it operates
smoothly. Repair if any abnormality is found.
[5] INSPECTION AROUND SAFE RUBBER TRACK
Check for any cracks, significant deformation or dirt in frame, rubber track, each roller, idler and
sprocket. Check for loose, lost or damaged bolts, nuts or pins.
Repair if any abnormality is found.
[6] INSPECTION AROUND CARRIER
• Look around and under the machine for loose, lost or damaged bolts, nuts, pins or piping
connectors. Repair if any abnormality is found.
• Look around and under the machine to see if any oil is leaking. Especially, check the bottom of
the hydraulic tank, carrier, crane controls and carrier motor. Repair if any abnormality is found.
• Look around and under the machine for any damage, significant deformation or dirt in lights
such as the headlights and working status lamp. Repair if any abnormality is found.
• Look around and under the machine for slack wiring, loose connections or any trace of burning.
Repair if any abnormality is found.
• Check for any cracks, significant deformation or dirt in the frame, machinery cover or engine
hood. Repair if any abnormality is found.
[7] INSPECTION AROUND ENGINE
• Check for fuel, oil or water leakage from the engine. Repair if any abnormality is found.
• Check for any accumulation or deposits of inflammable items including fallen leaves,
wastepaper, dust, oil or grease in high temperature areas such as engine muffler and around
batteries. If any accumulation or deposits are found, remove them.
• Check for slack wiring, loose connections or any trace of burning around the starter, alternator
or battery. Repair if any abnormality is found.
[8] INSPECTION AROUND CARRIER AND CRANE
• Check whether each operation lever, lock lever and acceleration pedal operates smoothly and
it goes back to the neutral position if you release it.
Repair if any abnormality is found.
• Check the monitor panel for any damage or dirt. Repair if any abnormality is found. Clean as
necessary.
• Check whether each switch for the outrigger control panel and monitor operates smoothly.
Repair if any abnormality is found.
• Check for slack wiring, loose connections or any trace of burning. Repair if any abnormality is
found.