Maeda MC815C, Operation Manual, Page: 216 / 426

206
3.14 CHECKING AFTER CRANE OPERATION
3.14.1 CRANE STOWAGE OPERATION
NOTES
•
Crane stowage operation is recommended by using control levers on the crane.
Boom stowage can be operated with radio controller, but it may be difficult to set to the exact
slew stowage position.
• Hook stowage cannot be operated with radio controller.
•
Read
“
OPERATION 2.23 CRANE STOWAGE OPERATION
”
for how to opearate crane
stowage.
3.14.2 STOPPING OPERATION BY RADIO CONTROL AND INSPECTION
• When the operation is finished, be sure to press the Emergency stop/Remote
controller power OFF switch (10) on the transmitter to turn “OFF” the power.
• On no occasion except for Crane operations, must the power of the Transmitter be
turned ON.
This could cause unexpected movement of the Crane resulting in a serious hazard,
such that the Crane hitting someone or an object, or the Crane could tip.
• When it is required to turn ON the Transmitter for the purpose of inspection or such,
ensure that the engine is not running.
1. Press the Emergency stop switch/Remote controller power OFF switch (10) on the
transmitter to turn “OFF” the power.
The engine also stops.
2. Turn the starter switch on the machine to the “OFF” position to shut off the power supply.
3. Check the transmitter and receiver.
(1) Check operation levers and switches of the Transmitter for any faults.
(2) Wipe off oil or dirt with a clean cloth.
(3) Repair all cracks or damages without fail.
4. To store the transmitter, avoid places subject to wind, rain, direct sunlight, high temperatures
and high humidity.