Maeda MC815C, Operation Manual, Page: 157 / 426

147
2.10 STOPPING ENGINE
CAUTION
• Stopping the engine before it sufficiently cools down may shorten the life of engine
units. Do not stop the engine suddenly except for an emergency.
• When the engine is overheated, do not stop the engine suddenly.
Change the engine speed to low, and gradually cool down the engine before stopping.
• Make sure that the main switch of the remote controller or the receiver is in the “OFF”
position.
1. Take your foot off the accelerator pedal (6), let the
engine idle for about 5 minutes with no load applied.
2. Turn the starter switch key to the “OFF” position.
The
engine stops.
3. Remove the starter switch key.
2.11 INSPECTION AFTER STOPPING ENGINE
1. Visibly check for oil leakage, fuel leakage, and water
leakage, and check around the crawlers, crane, and
exterior of the machine. If you find any leakage or
abnormality, fix the problem.
2. Fill up the fuel tank to full.
3. Keep the area around the engine free of dead leaves
and paper waste. A potential fire could occur if
disregarded.
4. Clean off the crawlers and outriggers, removing mud.