Maeda MC815C, Operation Manual, Page: 342 / 426

332
Equipment/It em Remote contr ol
Radio frequency 2402-2480 MHz band
Transmission output 100mW
Channel spacing 1MHz
Reachable range of radio waves 100m or longer (under a good condition where there is no radio interference)
Unique address
Extracted and set from 1 million or more addresses
at the time of shipment from factory
Waterproof IP65
Transmitter antenna Built-in type
Operating
status display
Status
LED
Battery status display
No reception display
Monitor LED
Receiver power status display
Transmitter power status display
Feedback
Telegram display
Safety device
Emergency stop switch
Misoperation avoidance function during interruption of remote control
Automatic power OFF device (Auto power off device)
Transmitter stop function when battery capacity decreases
Alarm switch
Transmitter voltage Battery BA405000 (6 VDC at 1500 mAh)
Receiver voltage Power of crane main body (12 VDC)
Continuous operating hours of
Transmitter
Approximately 20 hours (Changes depending on usage environment)
Ambient operating temperature -20 C to +70 C
Transmitter mass Approx. 1.8 kg (including battery)
Operation
item
s of Transmitter
Operation lever
Main boom derricking
Hook raising, lowering
Main boom expansion
Outrigger expansion
Outrigger extension / stowage
Slewing
Push button switch
Radio controller power ON / OFF switch
Engine start/stop switch
Speed selector/outrigger select switch
Load carrying/fly jib change switch
Horn
Emergency stop switch / radio controller power OFF switch
Toggle switch Accelerator control switch
Rotary switch Operation mode selector switch
Dial switch Display operation switch