manualshive.com logo in svg

Maeda MC815C, Operation Manual, Page: 25 / 426

Share
Download
Maeda MC815C Operation Manual Download Page 25

15 

5.4 HOW TO LOOK AT THE ANGLE INDICATOR 

 

•

  When hanging a load, decide the length of the boom (number of boom sections) and 

boom angle, beforehand. Compare the rated total load to the weight of the baggage 
hung. Make sure that the total weight of the hoisting accessories, baggage and 
slinging tools do not exceed that rated total load. 

 

The angle indicator is attached to the left 

and right sides of the No.1 boom and is 

composed of a “indicator” and “pointer 

scale” as shown on the right. 

The angle indicator should be used as 

follows:  

• 

Read the angle shown by the indicator. 

 

 This value is the “boom angle” at the 

time. 

 

 

 

Summary of Contents for MC815C











































































































































































































































































































































































































































Reviews:

No comments