MacDon A40-D, Operator'S Manual

Page: 119 / 240

214804
105
Revision A
Self-Propelled Windrower Header
Maintenance
Record
Action:
ü ü
- Check
SS
- Lubricate
p p
- Change
S
Conditioner universal shafts
S
Roll pivots
S
Conditioner shaft bearings
S
Knife drive cross-shaft
p
Knife drive box oil -
First 50 hours only
1000 Hours or 3 Years
p
Conditioner drive gearbox
lubricant
p
Knife drive box lubricant
4.4.2 Break-In Inspection
Hours Item Check Reference
5 Hardware Torque
8.1 Recommended Torques, page
207
5, 25, and 50 Knife drive belt Tension 4.8.1 Header Knife Drive, page 140
10
Knife drive box mounting bolts
Torque Mounting Bolts, page 132
Replace or tighten any missing or loose hardware. Refer to 8.1 Recommended Torques, page 207 .
4.4.3 Preseason Checks
CAUTION
•
Review the operator's manual to refresh your memory on safety and operating recommendations.
•
Review all safety signs and other decals on the header and note hazard areas.
•
Be sure all shields and guards are properly installed and secured. Never alter or remove safety
equipment.
•
Be sure you understand and have practiced safe use of all controls. Know the capacity and operating
characteristics of the machine.
•
Check the first aid kit and fire extinguisher. Know where they are and how to use them.
Perform the following checks at the beginning of each operating season:
1. Adjust tension on knife drive belt. Refer to 4.7 Cutterbar, page 117 .
2. Check oil levels and lubricate bearings. Refer to the following sections:
•
4.5.3 Knife and Gearbox Oil, page 114
•
4.5.2 Lubrication Points, page 107
3. Perform all annual maintenance. Refer to 4.4.1 Maintenance Schedule/Record, page 104 .
MAINTENANCE AND SERVICING