MacDon A40-D, Operator'S Manual

Page: 197 / 240

214804
183
Revision A
4.13.10 Checking/Adjusting Roll Alignment
Rolls are aligned at the factory, but adjustment is provided in case the rolls become misaligned during operation.
1. Lower header until it rests on the ground.
CAUTION
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
2. Open conditioner driveshield.
Figure 4.165: Roll Alignment Cover
3. Locate roll alignment cover (A).
Figure 4.166: Roll Alignment
4. Loosen bolt (A), and rotate cover (B) to expose
access port.
MAINTENANCE AND SERVICING