MacDon A40-D, Operator'S Manual

Page: 60 / 240

214804
46
Revision A
Figure 3.50: Driveline Shield
1. Disengage rubber latch (A), and open driveline
shield (B).
Figure 3.51: Support Bracket and Hose Bundle
2. Remove cap (A) from the electrical connector, and
remove the connector from the support bracket.
3. Disengage and rotate lever (B) counterclockwise to fully
up position to release the hose bundle (C).
4. Move hose/electrical bundle (C) to header.
Figure 3.52: Hose and Electrical Bundle
–
4.3 m
and 4.9 m (14 ft. and 16 ft.) Header Shown (5.5 m
[18 ft.] Header Similar)
5. Route bundle (A) from windrower through support (B)
and access hole (C) in header frame alongside existing
hose bundle (D) from header.
6. Remove cover on header electrical receptacle (E).
7. Push connector onto receptacle, and turn collar on
connector to lock it in place.
8. Attach cover to mating cover on windrower wiring
harness.
9. Remove caps from hydraulic couplers. Clean if
necessary.
OPERATION