MacDon A40-D, Operator'S Manual

Page: 164 / 240

214804
150
Revision A
Figure 4.85: Cam Follower
2. Remove cam follower bearing bolt (A), bearing (B),
and nut.
3. Disengage cam arm (C) from the cam track with a
pry bar.
4. Remove flangette mounting bolts (D).
Figure 4.86: Tine Bar Type B
Figure 4.87: Tine Bar Type A
A - Nuts B - Keepers
C - Shoulder Bolts D - Cam Arm Assembly
E - End Tines
5. Remove nuts (A), keepers (B), and shoulder bolts (C)
that connect cam arm (D) and end tines (E) to tine bar.
IMPORTANT:
Tine attachment hardware and configuration may vary
between Tine Bar Type A and Tine Bar Type B. Identify
locations so that tine hardware will be reinstalled at
same locations. Both Tine Bar Type A and Tine Bar
Type B configurations are required to stagger tines on
the reel bat and ensure all crop is picked up.
6. Position end of tine bar clear of cam disc, and remove
cam arm assembly (D), complete with bearing
assembly.
MAINTENANCE AND SERVICING