MacDon A40-D, Operator'S Manual

Page: 72 / 240

214804
58
Revision A
Figure 3.80: Grass Seed Header
A - Knife Return (Male Fitting at Header) (Not Shown in This Image)
B - Auger and Reel Pressure
C - Knife Pressure (Female Fitting at Header)
D - Case Drain
Figure 3.81: Hose Bundle Storage
8. Move hose bundle (A) from header, and position on
windrower left side with hose ends in support (B) and
under lever (C).
9. Rotate lever (C) clockwise, and push to engage
bracket.
10. Position electrical harness through support (B), and
attach cap to electrical connector.
11. Close driveline shield, and move windrower platform to
closed position.
12. Check to ensure hoses and electrical harness clear tire.
13. Detach header from windrower. For instructions, refer to
your windrower operator
’
s manual.
OPERATION