MacDon A40-D, Operator'S Manual

Page: 136 / 240

214804
122
Revision A
Figure 4.23: Guard Configurations
A - Pointed Standard (MD #118344) B - Pointed Drive End (No Ledger) (MD #118345)
C - Pointed Right Outboard (MD #118302) D - Pointed Left Outboard (MD #118301)
E - Pointed Center (MD #124338) F - Stub Standard (MD #118346)
G - Stub Drive End (No Ledger) (MD #118347) H - Stub Center (MD #124775)
CAUTION
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
Check daily that guards are firmly bolted to the cutterbar, and not worn or broken. Replace as required. A worn or
broken guard can be replaced without removing knife from cutterbar.
MAINTENANCE AND SERVICING