MacDon A40-D, Operator'S Manual

Page: 36 / 240

214804
22
Revision A
Table 2.1 A40D, A40DX Self-Propelled Windrower Auger Header Specifications (continued)
Rubber feed fingers
Standard
Stripper bars (three per side)
Standard
Auger drive
Hydraulic, 15.9 cu in. (261 cc) per rev
direct mounted motor
Standard
Auger speed SP windrower 230
–
320 rpm
Replaceable high density polyethylene auger pans: two-piece design
Standard
Rock drop tines at discharge opening with discharge angle adjustment Standard
Delivery opening width
2430 mm (95 11/16 in.)
Reel
Oval closed section bats with end caps.
NOTE: Grass Seed Special model has standard seven-bat reel
6 bats
optional 7 bat
Steel fingers
6 mm (1/4 in.) diameter
Reel radius (to finger tip)
540 mm (22 in.)
Single piece tine bar with replaceable polyethylene bearings
N/A
Sectioned tine bar with regreasable ball bearings
Standard
Drive
Hydraulic motor: 14.2 cu in.
(232 cc) /rev to enclosed gearbox
Standard
Reel speed
M100/M105/M205 SP hydraulic variable
50
–
85 rpm
Reel speed
M150/M155/M155 E4 /M200 SP hydraulic
variable
15
–
85 rpm
Reel speed M1170/M1240 SP hydraulic variable
(with variable speed kit installed)
15
–
85 rpm
Reel speed M1170/M1240 SP hydraulic variable
(standard reel)
50
–
85 rpm
Hay Conditioner
Roll-type Intermeshing steel bars
Roll size
Length 2590 mm (102 in.)
Roll size Overall 233 mm (9 3/16 in.)
Roll size
Tube 168 mm (6 5/8 in.)
Drive: 44 cc. hydraulic piston motor to enclosed gearbox Standard
Roll speed SP windrower
601
–
810 rpm
Plug Prevention / Unplugging
Self-propelled
Reverse hydraulic flow to three motors
(reverses knife, auger, reel, and
conditioner)
Optional
PRODUCT OVERVIEW