MacDon A40-D, Operator'S Manual

Page: 58 / 240

214804
44
Revision A
Figure 3.45: M200 without Reverser Valve
Figure 3.46: Auger Pressure and Auger/Reel
Return Hose Couplers
–
4.3 m and 4.9 m (14 ft.
and 16 ft.) Header Shown (5.5 m [18 ft.] Header
Similar)
14. Locate the auger pressure (A) and auger/reel
return (B) hoses.
Figure 3.47: M200 with Reverser Valve
15. Push auger pressure (A) and auger/reel return (B) hose
couplers onto mating receptacles on valve block until
collar on receptacle snaps into lock position.
16. If valve blocks are NOT configured as shown above,
install required fittings as described in the unloading
and assembly instructions supplied with your A40D
Auger Header.
OPERATION