MacDon A40-D, Operator'S Manual

Page: 77 / 240

214804
63
Revision A
Figure 3.85: A40D Right Side
7. Open right endshield.
8. Loosen four nuts (A).
9. Loosen jam nut on adjuster bolt (B), and turn bolt (B) to
adjust auger fore-aft position.
10. Tighten jam nut.
11. Tighten nuts (A).
12. Close shields before engaging header.
Adjusting Vertical Position
CAUTION
To prevent accidental movement of windrower, return ground speed lever (GSL) to Park, center steering
wheel to lock, shut off engine, and remove key.
Figure 3.86: A40D Left Side
1. Shut off engine and remove key.
2. Open left endshield
3. Loosen four nuts (A).
4. Loosen jam nuts on adjuster bolts (B), and turn bolts (B)
to adjust auger vertical position.
5. Tighten jam nuts.
6. Tighten nuts (A).
Figure 3.87: A40D Right Side
7. Open right endshield.
8. Loosen four nuts (A).
9. Loosen jam nut on adjuster bolts (B), and turn bolts (B)
to adjust auger fore-aft position.
10. Tighten jam nut.
11. Tighten nuts (A).
12. Close shields before engaging header.
OPERATION