MacDon A40-D, Operator'S Manual

Page: 169 / 240

214804
155
Revision A
Figure 4.100: Tine Bar Type A
10. Slip new tine onto center tine bar (E).
11. Assemble left tine bar (D) to center tine bar (E) and
secure with shoulder bolts (B), keeper (C), and nuts.
12. Install tine bar onto reel disc with hardware (A). Tighten
bolts to 31
–
36 Nm (23
–
26 lbf·ft).
Type B tine bars
Figure 4.101: Tine Bar Type B
13. Remove flangette mounting bolts (A) at reel disc #2.
14. Remove shoulder bolts (B) and keeper (C) from
tine bar.
15. Separate left tine bar (D) with bearing from center tine
bar (E).
16. Remove tine from center tine bar (E).
Figure 4.102: Tine Bar Type B
17. Remove bearing (A) from tine bar connecting shaft (B).
Refer to 4.5.4 Installing Sealed Bearings, page 115 .
18. Remove nut (C), shoulder bolt (D), and keeper (E) from
left tine bar (F) and remove tine (G).
MAINTENANCE AND SERVICING