MacDon A40-D, Operator'S Manual

Page: 40 / 240

214804
26
Revision A
Figure 3.2: Hose Support
2. Insert hose support (B) into hole (A) in the windrower
left leg, and route header hose bundle (C) under the
windrower to the hydraulic and electrical couplers.
Figure 3.3: M1170/M1240
–
Disc Header
Configured
3. If attaching to a disc-ready windrower, ensure knife
drive hose (A) is connected to coupler (B).
NOTE:
Hose (A) provides power to run the knife/conditioner.
Figure 3.4: M1170 Standard Configuration
–
Auger/Draper Ready
NOTE:
M1170 Windrowers with standard auger/draper
configuration don
’
t require the knife drive hose; only the
two multicouplers (A) are used to connect the
auger header.
OPERATION