MacDon A40-D, Operator'S Manual

Page: 184 / 240

214804
170
Revision A
Figure 4.132: Forming Shield Attached to
Windrower Legs
4. Remove two clevis pins (B) from forming shield
forward end.
5. Lift forming shield off bolts (A) in windrower legs, and
lower to ground. Replace clevis pins in forming shield.
6. Slide forming shield out from under windrower, or drive
windrower away from forming shield.
4.13.3 Disassembling Forming Shield
To disassemble the forming shield, follow these steps:
Figure 4.133: Forming Shield
1. Invert forming shield onto top.
2. Remove lynch pin (A) from adjuster rods (B), and
disassemble rods from side deflectors (C).
MAINTENANCE AND SERVICING