MacDon A40-D, Operator'S Manual

Page: 123 / 240

214804
109
Revision A
Figure 4.6: A40D, A40DX Header Right Side
A - Knife Drive Bearing (1 Place) (50 Hours) B - Reel Shaft Bearing (1 Place) (50 Hours)
C - Auger Shaft Bearing (1 Place) (50 Hours) D - Knifehead Bearing (1 Place) (25 Hours)
NOTE:
High Temperature Extreme Pressure (EP2) Performance With 1% Max Molybdenum Disulphide (NLGI Grade 2)
Lithium Base. To prevent binding and/or excessive wear caused by knife pressing on guards, do
NOT over-grease.
If more than 6 to 8 pumps of grease gun are required to fill the cavity, replace the seal in the knifehead.
MAINTENANCE AND SERVICING