MacDon A40-D, Operator'S Manual

Page: 62 / 240

214804
48
Revision A
Figure 3.55: Auger Return and Reel Pressure
Hose Bundle
11. Route auger return and reel pressure hose bundle (A)
from header to windrower, and position bundle above
existing hose support (C) as shown.
12. Secure with three straps (D), and lower lever (B).
Figure 3.56: Auger/Reel Pressure and
Auger/Reel Return Hose Couplers
13. Push auger/reel pressure (A) and auger/reel return (B)
hose couplers onto mating receptacles on valve block
until collar on receptacle snaps into lock position.
Figure 3.57: Factory Routing M150, M155,
M155
E4 , and M200
A - Reel Motor B - Auger Motor
14. Check hose routing at the reel motor.
NOTE:
The hose routing depends on which windrower model
the header is being attached to. The header is factory
configured for M150, M155, M155
E4 , and M200
Windrowers.
OPERATION