Lexmark XC4342 User Manual Download | Manualshive

Page: 328 / 350

background image

Notices

Product information

Product name:

Lexmark CX730de, Lexmark CX735adse, Lexmark XC4342, Lexmark XC4352 MFPs

Machine type:

7530

Models:

236, 239, 678, 679

Edition notice

February 2022

The following paragraph does not apply to any country where such provisions are inconsistent with local
law:

LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY

KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of
express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made
to the information herein; these changes will be incorporated in later editions. Improvements or changes in the
products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to
make these available in all countries in which it operates. Any reference to a product, program, or service is
not intended to state or imply that only that product, program, or service may be used. Any functionally
equivalent product, program, or service that does not infringe any existing intellectual property right may be
used instead. Evaluation and veriﬁcation of operation in conjunction with other products, programs, or services,
except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, go to

http://support.lexmark.com

.

For information on Lexmark's privacy policy governing the use of this product, go to

www.lexmark.com/privacy

.

For information on supplies and downloads, go to

www.lexmark.com

.

© 2022 Lexmark International, Inc.

All rights reserved.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is deﬁned in 48
C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are
used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R.
227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software

Notices

328

«
...
326
327
328
329
330
...
»

Summary of Contents for XC4342































































































































































































































































































































































Reviews:

No comments

Related manuals for XC4342

Brand: Unisys Pages: 255

Brand: Xerox Pages: 199

Brand: Oki Pages: 100

Brand: Oki Pages: 2

Brand: Xerox Pages: 316

Brand: Xerox Pages: 74

Brand: Xerox Pages: 306

Brand: Xerox Pages: 16

Brand: Xerox Pages: 4

Brand: Oki Pages: 38

Brand: Oki Pages: 38

Brand: Oki Pages: 36

Brand: Oki Pages: 36

Brand: Wasp Pages: 2

Brand: OEC Pages: 28

Brand: Cab Technology Pages: 10

imageRUNNER 2545i

Brand: Canon Pages: 37

Brand: Olivetti Pages: 139

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands